japanesegasil.blogg.se

1. #USE EXPRESSIVE E TOUCHE FOR MIDI TO CV CONTROLLER HOW TO#
2. #USE EXPRESSIVE E TOUCHE FOR MIDI TO CV CONTROLLER MANUAL#

Should you want to change the MIDI channel that the preset sends on, or define a program change message that is sent each time the preset is loaded, then you need to click on the Instrument View Button.

Test the behaviour of your newly created preset, and adjust the min/max values and Curve of each Slot if needed.Ħ. Assign the chosen parameter to one of the four axes for each Slot you wish to use.ĥ. If you select a “Template” preset, you will see that in the drop-down list, the CCs are renamed according to the real names of the parameters from the selected instrument.Ĥ. For one or several of the 8 Slots, choose the voltage or the CC you wish to control by selecting it in the drop-down list. Click on “NEW HARDWARE PRESET” in the Menu or select a Hardware Template.ģ. If Touché is connected to both Lié and your hardware synth, it should now be controlling your synth.ġ. To load a hardware preset temporarily, just double click on its name in the browser. Pre-Mapped PresetsĪ list of Hardware Presets coming with Lié, as well as an explanation of the differences between Template Presets and Pre-Mapped Presets can be found here: Hardware Synth Presets explained Working with Hardware Presets Dial up a Hardware Pre-Mapped Preset and play with it Depending on your setup, this could lead to an infinite loop of MIDI messages, where your DAW receives information from Touché and sends it back to Touché again, since Touché will always forward all MIDI data received both to its USB MIDI, as well as its MIDI output.

#USE EXPRESSIVE E TOUCHE FOR MIDI TO CV CONTROLLER MANUAL#

Check the manufacturer's manual and make sure this option is enabled.Ĭaution: Please make sure that you didn't coincidentally activate a MIDI output in your DAW or in your synth that eventually sends MIDI back to Touché. Receiving MIDI CC information could also be an option in your synth's menu that may not be activated by default. Your synth has to be on the same MIDI channel as Touché (MIDI Channel 1 by default). Should you want to use a control voltage output, connect up to 4 CV outputs to CV inputs on your synth or module. Connect Touché's MIDI output to your synthesizer's MIDI input with a standard MIDI cable, using our 5-pin DIN to 1/8" jack adapter cable.ģ. Make sure that Touché is connected to your computer, and speaks to Lié (LEDs are white, Touché in Slave Mode).Ģ. To browse through all available Hardware Presets or to prepare the creation of your own Hardware Presets, please follow these steps:ġ. Precautions Setting up Touché with your hardware synth Hardware Presets are only supported for owners of the classic Touché.

#USE EXPRESSIVE E TOUCHE FOR MIDI TO CV CONTROLLER HOW TO#

This article explains how to create your own Hardware Presets. How to use Hardware Presets (Touché only)